In today's post we will learn how to make a very lovely gift box reusing rolls of tape! You will see that it will take a little work, but the end result is amazing and no one will imagine that it was made from reusing tape rolls. You will learn this technique and can still win a dindin because the pieces are really wonderful. Prepared to get the job? Come on.
MEATERIAL
Rolls of adhesive tape;
Pieces of delicate fabrics;
Small piece of cardboard;
White glue;
Colored papers mimosos;
Scissors;
Thick satin ribbon (preferably white).
INSTRUCTIONS
1 - The first step is to attach the tape in a satin edges of the roll. Start the glue on the outside thereof.
2 - Once pasted on the outside, turn the piece of satin ribbon and glue it to the inside of the roll. The result will be the one below.
3 - Now choose a colored paper and dainty and wrap it inside the roll. You should get the measurements and cut the correct size paper for the internal padding
4 - Stick the paper cut in the previous step with a little white glue. The paper should be pasted on the satin ribbon have pasted above. The finish shall be equal to the initial image below.
5 - At the other end, cut the remaining paper in rows.
6 - After cutting it in rows, fold it one by one and paste outside of the roll.
7 - Now cut a disc of colored cardboard the same diameter of the roll, as the image below.
7 - Now cut a disc of colored cardboard the same diameter of the roll, as the image below.
3 - Now choose a colored paper and dainty and wrap it inside the roll. You should get the measurements and cut the correct size paper for the internal padding
4 - Stick the paper cut in the previous step with a little white glue. The paper should be pasted on the satin ribbon have pasted above. The finish shall be equal to the initial image below.
5 - At the other end, cut the remaining paper in rows.
6 - After cutting it in rows, fold it one by one and paste outside of the roll.
7 - Now cut a disc of colored cardboard the same diameter of the roll, as the image below.
7 - Now cut a disc of colored cardboard the same diameter of the roll, as the image below.
9 - We're going to finish bottom, gluing the paper throughout its area. Leave some leftovers of this role, they will be used for completion.
10 - On the outside, cut the leftover shaped strips and glue them to finish. Ready the basis of our gift boxes! Now for the cover!
11 - cut a disc of cardboard with the same roll diameter. Glue the satin ribbon on the edges of the disc and wait for drying.
12 - Cut a dainty paper disc diameter only slightly smaller than the hard paper card. It will be glued later, after positioning the lid.
13 - To fix the disk that serve as a lid of the jewel, the paste thick satin ribbon in both parts uniting them. Notice in the image below.
14 - Paste paper that has been cut out in step 12 on the lid.
15 - Now cut out a piece of paper and paste it mimosos around the roller on the outside to finish the finish.
16 - If desired, decorate the cover with yoyos, jewels or whatever else your imagination send!
Liked the idea above? Well the original is not it! Besides this, we have several others here on the site, do not miss.
No comments:
Post a Comment