Build a beaded spider

Yes, it seems but is not. Has not yet come Christmas and this is not the draw of Gordo. If you are of Spanish nationality this spider will inevitably recall the traditional strings of Christmas raffle balls but it is a spider made with wooden beads. Perhaps to avoid that seemed so natural to us would be better to change the wooden beads crystal beads. In whatever form this spider is a job that can decorate the dining room, living room or even the terrace if you prefer.

The processing technique is not complicated, on the contrary, as simple as making a necklace. Well in this case would be a lot of necklaces. But ultimately the technique is the same and no one can say it is not original and elegant.

Materials:

A metal planter hanging of 35 cm in diameter.
Two metal rings.
Fishing line.
Scissors.
An electric kit lamps.
Wood or glass beads, 600 16 mm and 12 mm 1200.
Perforated metal strip.
Hot glue gun.

Cloth tape.

We will attach metal rings and the planter with fishing line, the set will measure about 75 cm in height. Among the rings leave about 38 cm or so. If we hang some support assembly will be easier the job done. Before starting with the threaded mount accounts with electric kit and power cord socket. We'll tie double pieces of fishing line the edge of the planter and go stringing beads, tie the end to the bottom of the planter. Then do the same with the top where we will use the smaller accounts to cover the entire surface. To hide the knots so the top ring and the edge of the planter cut a piece of perforated metal strip and attach it around these parts. After the metal strips cover with cloth tape we have chosen pasting on the metal strips. We'll just hang our chandelier in the place we have reserved for it.