Individual table with old t

We recycle at Guiade Crafts . com. And this time the idea is to use old t-shirts or shirts we have at home.
Always in our kitchens and dining rooms needed individual for the table. The cups, fountains and other hot stuff we have to put on the table always need support to protect our tables they emanate heat.

With simple materials and always have at hand can do wonders and will.
Materials for Individual Bureau are:

• Old shirts of colors.
• Scissors.
• Corrugated cardboard or similar.
• Thick thread or twine.
• Pencil.
• Rule.
• Tape.
• We will work!

Individual Steps to Making Table

They are very simple to make and do not take too long. It is good if we have shirts of different colors because we can put together an attractive combination.
First of all you cut strips of colors of the shirts, they should be very thick but about 3-5 inches wide approximately, but they must be long enough to size individually satisfied they will do.
In the corrugated cardboard or the like, should mark the individual size make. This board will be the basis for making our beds.
Once cut, must be marked with the ruler and pencil parallel lines with a distance between them of 2-3 inches as you can see in the pictures.
On them to place the twine or coarse thread, which stick in the ends using tape. With this ready and can begin to give shape and color individually.

You must be taking the colored strips and braid as can be seen in the photograph. Once above and one below the threads. You must repeat the procedure until the end and should tie the ends as shown in the picture.