Like all celebrations, Valentine has become too commercial, people prefer to buy anything that will remove the step and make him look good effort only draw his credit card. But there is still people who prefer a more simple and less mercantilist this day, which by the way should be every day, do not love one day a year but every day of the year. For these people who still believe in the effort and small details bring this little project to give the next Valentine's Day. A simple work done by the hands of the beloved is much more valuable than any expensive gift
With this little detail made with our own hands, surely at least light a smile on the face of the beloved. And that smile is the light that illuminates our lives.
The materials to meet are:
Red wire.
An incandescent light bulb.
Pliers.
Sestornillador.
Safety glasses.
A wooden bucket.
Needles or nails.
Paper and pencil.
Hammer.
Hot glue gun.
Although this work will be an expression of love, things of life, we must begin by destroying the inside of the bulb . We will in a large area, skipped many splinters and following safety rules. We will use goggles and gloves to protect our eyes and our hands from damage. In an article on the same page as we speak of this technique to clear a bulb .
Will cut about 30 cm red wire, it will fold in half and making a couple of loops will give heart-shaped, the size of this should not be larger than the opening in the bulb. Once we have our heart continue rolling the two ends of the wire. If we want to do more "loving filaments" repeat the process. If the wooden block we have is balsa filaments can insert directly into it. If wood is current perforations have to do with the hammer and nail to insert the filaments. Then apply a little hot glue. Then post the bulb above, introducing the filaments inside. Also will stick bulb to wood. We will put the message on the front of the wooden base and we will have the job done.
It is hard work as you have seen, maybe a little emptying the bulb, but it is by our love. Hope that you have a wonderful Valentine.
With this little detail made with our own hands, surely at least light a smile on the face of the beloved. And that smile is the light that illuminates our lives.
The materials to meet are:
Red wire.
An incandescent light bulb.
Pliers.
Sestornillador.
Safety glasses.
A wooden bucket.
Needles or nails.
Paper and pencil.
Hammer.
Hot glue gun.
Although this work will be an expression of love, things of life, we must begin by destroying the inside of the bulb . We will in a large area, skipped many splinters and following safety rules. We will use goggles and gloves to protect our eyes and our hands from damage. In an article on the same page as we speak of this technique to clear a bulb .
Will cut about 30 cm red wire, it will fold in half and making a couple of loops will give heart-shaped, the size of this should not be larger than the opening in the bulb. Once we have our heart continue rolling the two ends of the wire. If we want to do more "loving filaments" repeat the process. If the wooden block we have is balsa filaments can insert directly into it. If wood is current perforations have to do with the hammer and nail to insert the filaments. Then apply a little hot glue. Then post the bulb above, introducing the filaments inside. Also will stick bulb to wood. We will put the message on the front of the wooden base and we will have the job done.
It is hard work as you have seen, maybe a little emptying the bulb, but it is by our love. Hope that you have a wonderful Valentine.




No comments:
Post a Comment