- window glazing bead (available in stores "Do It Yourself", as well as household goods and building materials stores) - 4 sticks of length 60 cm and a length of 4 sticks of 30 cm, total - 3.6 m;
- 9 plastic liners from the chocolate eggs;
- strip wallpaper (oilcloth) length of 1.25 m, a width of 25 cm, double-sided tape, and tools:
- pencil and ruler;
- small hacksaw;
- permanent marker;
- awl;
- manicure scissors.
Technique of performance: the construction of improvised materials.
Drank hacksaw bead sticks to the desired size. On 2 sticks 60 cm long put marks every 20 cm
Take 4 plastic "eggs". The tops of each "egg" Pierce awl. Around each hole with a permanent marker, draw a circle with a diameter of 0.7 cm Cut out these mugs nail scissors. The resulting holes are needed in order to impose an "egg" on a stick. Likewise, make one more hole, as shown in Fig. 32.1 . These holes are needed in order to insert them in the transverse rods.
Spread on each marked-you stick to 2 eggs and place them in tags. In additional holes paste the transverse rods (length 30 cm). You get a "ladder." Now do for her support.
Take 2 whole plastic "eggs". Method described above, make three holes, as shown in Fig. 32.2 . Plant them each "egg" on the upper ends of the rods "ladder" between them paste the transverse rod (30 cm long). In the remaining additional holes paste the upper ends of the rods to support (up to 60 cm). In one "egg" make two holes, as shown in Fig. 32.3 (they need in order to secure the support rods). Insert the lower ends of rods into the holes.
Make holes on only one tip of each of the remaining "eggs." Insert into the holes lower ends of sticks "ladder."
Partition a strip of wallpaper (oilcloth), as shown in Fig. 32.4 . Bend the strip along the lines of concertina folds. In places marked yellow stripe (departing from the fold line 2 cm), attach double-sided tape.
Hang "pocket" on the rungs of "ladder" and, taking the protective tape from the tape, it is gluing the two layers together. In the lowest hole "pockets" Insert remaining stick ( Fig. 32.5 ).
