DIY Ottoman recycling materials

Create this ottoman is a project that will allow us to decorate our house almost exclusively using recycled materials. With a wooden spool in which electrical cables are sold at hardware stores have the basis for our ottoman.

Although there have a very specific role Ottoman elegantly upholstered always look good in any space. Bring a touch of sophistication and attention to detail that never hurts in any decor.

Materials:

• One electric cable reel vacuum timber and two circle diameter of 50 cm
• 6 pieces of wood 15 cm x 5 cm x 2.5 cm
• Screws
• Wood glue
• Foam
• Adhesive spray
• 1.5 m of wadding
• 1.5 m fabric upholstery
• 70 cm fabric to cover the bottom
• 4 legs and screws
• Stapler

We connect the two circles of wood with screwed and glued pieces of wood between them. Try not to project any of the timber should be within each timber circle.

Make a circle on the foam of the same diameter or slightly more than wood on the piece of foam, cut with a utility knife or an electric knife.

Paste the foam circle on one of the circles of wood with spray adhesive. Use the structure to make a circle the same size on the fabric you intend to use for upholstering. You can cover the structure with a light cotton fabric.

Wrap the entire structure with wadding and secure it with staples to the beams and the lower timber circle.

Cut the fabric circle and sew around the fabric needed to cover the structure completely.

Place the fabric and secure it once sewn to the bottom with staples. It must be taut to avoid wrinkles form.

Finally also staple the fabric covering the bottom of the ottoman and install the legs you've chosen for her.