Tip your clutch ways do not need to sew more

Just a few pieces of fabric and faux leather material needed is you can DIY a clutch for the summer and personality that!

To make clutch , you should:

- 1 cloth leather (or faux leather) red 

- 1 pcs rivets (to lock the clutch)

- Tools: scissors, hammer, punch, needle, pins

Step 1 : -  First, you cut 2 leather canvas size 33x22cm

Step 2 : -  Fold edge of fabric along the length of the cloth in the first two paragraphs of 1.5 cm and the fixed pins. Then you sew one straight line than 1cm from the edge .

Step 3 : -  Face of the two left together cloth fabric so that the edges overlap, then the fixed pins. - Use press tooling punch small holes 1cm from the edge of the fabric, holes spaced 1, 5cm.

Step 4 : -  Cut more wire segment size 26x3cm. The number of wires required with the hole cut by clicking on two canvas.

Step 5 : -  Hook a piece of wire into the hole and click on the two knotted cloth back. 

Step 6 : -  After being forced out wire rim around the sides and bottom of the bag, you use a device button rivets attaching the lock buttons work done.

The ultra-stylish leather clutch finished it!

You can add padlock in the clutch and make 2 long cords attached to cross-okay to wear!

You can also adjust the length of the tassels to fit right again?