Increasingly, given the question, "How to make daisies from plastic bottles with their own hands?" This is explained by the fact that such decoration manufactured easily. Yes, and all the necessary components are always at hand. There are several different ways to create these crafts. In this article are two of the simplest that are best suited for novice masters.-
Among the materials you need to pay attention to the following:
- Plastic containers for dairy products under the flower (suitable containers from milk, kefir, yogurt or sour milk). It would be better if it cover yellow, but it is not critical. You can also use other colors, but in this case you will need a white paint.
- Green container petals. Again - you can both design, but then definitely need paint.
- Thick (5.8 mm 2 ) and a thin (1 mm 2 ) wire.
- In some cases, you may need to nail yellow.
- Adhesive tape or insulating tape.
- PVA glue type.
- Shrinkage green.
In turn, the tool you need to prepare:
- scissors;
- pliers;
- knife;
- line;
- awl;
- pencil;
- brush;
- matches or a lighter.
If all this is at your fingertips, you can start to deal with how to make daisies out of plastic bottles on their own. Simple solution In this case, we need a small capacity (0.5 liters is perfect) with a large lid. It is cut at a distance of 7.5 cm from the top. The cover makes a hole for mounting stem and install it. Along the edges of the leaves cut out the desired shape. Unbend them. If the cover is not yellow, it must be covered with nail varnish or oil paint yellow and allow to dry. Worn green on stem shrinking and heated. Next, the leaves are made. They are cut from green beer packaging. Attached to the stem thin wire. This is the most simple and the most common design of how to create a daisy out of plastic bottles. Photos of this performance is most often found in magazines on needlework.
More complex options
In the second case, a similar sequence of actions, but the algorithm for creating the flower a little more complicated. In the first case, we relied on the shape of the bottle and on its basis crafts produced, then there is not necessarily. Take any container and cut two circles - this is the core. In one of them make a hole for attaching the stem and fix it with a thin wire and glue. Cover them with yellow paint, give dry. Then cut into petals and glue themselves to the bottom of their range. Then glue them on top of the second round. Petals are on previously described procedure as stem. Thus the method may be made of large plastic bottles daisy. For this purpose we use a large plastic containers with a capacity of 5 liters or more. Conclusion
In this article shows two ways of how to make daisies from plastic bottles. One of them is more simple and is based on the external shape of the bottle, it is better suited for the novice master. And the second - is more difficult, but can provide more comprehensive solutions. It would be better for more experienced creators of such beauty