PEACOCK OF PLASTIC BOTTLES FOR THE GARDEN

Author: Alain Zinoviev need: 10l canister body, strong wire and plastic tubes for the legs, welded wire mesh 45 to 150 cm thick foam for the head, plastic bottles in various shapes and sizes.

We cut strips and cans , shifting back, I fix it with screws. bend the wire to the frame, put the tube and set on a stand.

canister is attached to the base by means of wire, pulling it through with an awl to puncture the legs I cut the bottle. screwed feathers, closing the hole at the top of the legs fortify kulechki white bottles, forming a thickening Feathers close bottom of the trunk and on the sides a little bend to reach the canister, "round out" the front and attach form kryla.

Hvost circumcised triangle with the apex body in flight feathers cut from 30l ballona.Shirina 5-7 sm.Mozhno replace 2L bottles are bolted to the edge of the wing feathers to the second row will need 1.5l bottle (3-4 pcs.) screwed semicircle. Subsequent rows of doing 0.5l bottles (about 30 pieces) is also a semi-circle, overlapping the previous row by half. carved head of foam ( ordinary knife). eyes of soft toys. GRINDER sandpaper until smooth Feather crest cut out of the strips of butylki.Sgibayu along for strength inserted into a hole in the head, back filling glue (such as "Titan") is glued veki.Na triangle beak and pasting from a bottle, picking up screws (then you can remove them, but as I leave the nostrils) Neck two 5l butylok.

Svorachivayu plastic bags and interconnected in a circle then fasten the feathers of 0.5l bottles Paws Last numbers on the head pasting ordinary enamel paint your tail feathers for cut out of green butylok.Dlya this middle part along the bend, and cut into rounds out bahromoy.Obychno from one bottle goes one big feather or two malenkih.Dlya beautiful tail will need at least 60 pcs. screwed ready painted feathers from the bottom of a semicircle, each following a series of overlapping previous half. few feathers from light 
green bottles revive bird